UL Listed CO2 Fire Suppression System/CO2 Fire Suppression System
Application:
Synergy CO2 fire protection systems are available for use in total flooding or local fire protection applications - making it an effective fire protection system for a wide variety of hazard. It is extremely versatile, effective on a wide range of flammable and combustible materials and approved for Class A, B, and C hazards.
It is widely used in Non-occupied control rooms, coating operations, paint lines, dust collectors, transformer vaults, live electrical equipment, flammable liquids, and commercial fryers, etc.
| Introduction |
| Carbon Dioxide Gas |
| Under normal atmospheric temperature and pressures, carbon dioxide exists as a colorless, odorless gas which is about 1.5 times heavier than air. Carbon dioxide will not burn or support combustion and will not sustain life. When confined within a suitable pressure vessel and depending on temperature and pressure conditions, carbon dioxide can exist in any of three stages of matter; solid, liquid and gas. |
| |
| High Pressure Carbon Dioxide System |
| High pressure CO2 system is a specialized fire extinguishing system designed to maintain the carbon dioxide supply at 21º C and 850 psig in strength alloy steel cylinders. The cylinders contain the CO2 required to protect the largest single hazard. On large hazards where several cylinders are required, a manifold is used to connect each cylinder by means of flexible hoses and check valves. Cylinder valves control the CO2 flow to the hazard through properly sized pipe, terminating in nozzles that apply the CO2. Flow rate is controlled by nozzle orifices as well as pipe sizes. The cylinder master valves are electronically operated and the slave valves are pressure actuated. The master valves can be automatically and/or manually operated. |
| |
| CO2 Extinguishing System Most Ideal For Protecting |
| |
Available Cylinder Valves:
Audited Supplier 
){kind=link}
){kind=link}